Brick Debris Dust as an Ecological Filler and Its Effect on the Durability of Asphalt Mix

Abstract

Brick debris is one of the main construction wastes obtained from demolition of buildings. However, this material can be successfully used in the recycling process. The purpose of the study was to determine the brick dust addition effect on asphalt surface service life. An asphalt concrete reference mix was designed for bonding layer and prepared using a Marshall compacting device. In addition, three mixes with combined lime-brick filler were prepared as well as one mix containing only brick filler. The samples were tested for their volumetric properties—density, bulk density, air void content, resistance to water and frost and stiffness modulus with varying test temperatures. It was found that 25% of brick dust addition to the filler did not considerably change the properties of the tested samples, while in the case of 50% filler the replacement stiffness and frost resistance decrease; however, the minimum required value is maintained. It can be concluded that the lime filler can be replaced with up to 50% of brick dust without a negative impact on the properties of asphalt mix. The proposed solution fits into the idea of sustainable development indicating a way of brick debris management.

Keywords

• brick debris dust
• mineral filler
• asphalt mix
• air voids
• water sensitivity
• stiffness modulus