Algorithm for Taming Rubidium Atomic Clocks Based on Longwave (Loran-C) Timing Signals

Abstract

This paper explores effective methods for taming rubidium atomic clocks with longwave timing signals. In an in-depth analysis of the time-difference data between the 1PPS timing signal output from the ground-wave signal received by a long-wave receiver and the 1PPS signal from UTC, we observe that the time-difference data has significant short-term jitter and long-term periodicity effects. To meet this challenge, we adopt several innovative strategies. First, we use the Fourier transform algorithm to analyse the time-frequency characteristics of the time-difference data in detail and accordingly propose a de-jittering correction algorithm for the long-wave timing data, which is aimed at improving the stability of the long-wave timing signals. Secondly, the time difference model of the rubidium clock is innovatively modified, and a quadratic polynomial superimposed with a periodic fluctuation term is constructed, which can accurately solve and eliminate the periodic components and obtain smoother time difference data. Finally, the parameters of the rubidium clock are accurately estimated by the least-squares method using the corrected smoother time difference data, and the output frequency of the rubidium clock is adjusted accordingly so that the rubidium clock is tamed effectively by the long-wave timing signal successfully. The experimental results show that the long-term stability of the tamed rubidium clock is significantly improved to 3.52 × 10−13/100,000 s; meanwhile, the phase deviation of the output 1PPS from the UTC of the tamed rubidium clock after entering the stabilisation period is kept within 25 ns.

Keywords

• long-wave (Loran-C)
• rubidium atomic clocks
• time-frequency analysis
• tame atomic clocks
• least squares