Properties of Elasto-Hydrodynamic Oil Film in Meshing of Harmonic Drive Gears

Abstract

Among the essential issues facing designers of strain wave gears, the provision for correct lubrication should be of paramount importance. The present paper presents the results of research on elasto-hydrodynamic oil film in meshing of a harmonic drive with an involute tooth profile. The research was carried out based on theoretical models developed by Dowson and Higginson. For the discussed structural problem, results of the study are presented graphically in the form of static characteristics of the oil film. Correct operation regimes were determined for two different oils. The paper also provides a review of information concerning the design and principle of operation of strain wave transmission.

Keywords

• harmonic drive
• geometry
• mesh
• wave generator
• rigid circular spline
• flexspline