Study on Shielding Effectiveness of High Transmittance Coating Film Glasses against Electromagnetic Pulse

Abstract

This study investigated the shielding effectiveness (SE) of glass materials with conductive coatings by establishing a 3000 × 3000 × 3000 mm electromagnetic pulse (EMP)—shielded room according to the EMP shielding requirements in the US military standard MIL-STD-188-125-1. The EMP SE of conductive-coated glass samples was measured and verified with the broadband EMP conditions of 10 kHz∼1 GHz. The conductive thin film coating on the glass was made by mixing conductive materials, including In2O3, SnO2, Ta2O5, NbO, SiO2, TiO2, and Al2O3, at different ratios. The mixed solutions were then coated onto the glass targets to facilitate conductive continuity between the conductive oxides and the shielding metal structure. The glass samples had dimensions of 1000 × 600 mm, which had electrolytic conductivity σ = 4.0064 × 103∼4.7438 × 103 (S/cm), 74∼77% transmittance, and 6.4∼6.8 Ω/□ film resistance. The experimental results indicated that the glass had SE of 35∼40 dB under 1 GHz EMP, satisfying the US National Coordinating Center for Communications’ Level 3 shielding protection requirement of at least 30 dB. The glass attenuated energy density by more than 1000 times, which is equivalent to shielding over 97% of EMP energy. Accordingly, the glass materials can be used as high-transmittance conductive glass for windows of automobiles, vessels, and aircrafts to protect from EMPs.

Keywords

• quantum electrodynamics
• quantum materials
• electromagnetic pulse
• shielding effectiveness
• high transmittance coating glasses
• sheet resistance