Journal of Information Display (Oct 2021)

Biodegradable all-polymer field-effect transistors printed on Mater-Bi

  • Elena Stucchi,
  • Ksenija Maksimovic,
  • Laura Bertolacci,
  • Fabrizio Antonio Viola,
  • Athanassia Athanassiou,
  • Mario Caironi

DOI
https://doi.org/10.1080/15980316.2021.1990145
Journal volume & issue
Vol. 22, no. 4
pp. 247 – 256

Abstract

Read online

The growing demand of disposable electronics raises serious concerns for the corresponding increase in the amount of electronic waste, with severe environmental impact. Organic and flexible electronics have been proposed long ago as a more sustainable and energy-efficient technological platform with respect to established ones. Yet, such technology is leading to a drastic increase of plastic waste if common approaches for flexible substrates are followed. In this scenario, biodegradable solutions can significantly limit the environmental impact, actively contributing to eliminate the waste streams (plastic or electronic) associated with disposal of devices. However, achieving suitably scalable processes to pattern mechanically robust organic electronics onto largely available biodegradable substrates is still an open challenge. In this work, all-organic and highly flexible field-effect transistors, inkjet printed onto the biodegradable and compostable commercial substrate Mater-Bi, are demonstrated. Because of the thermal instability of Mater-Bi, no annealing steps are applied, producing devices with limited carrier mobility, yet showing correct n-type behavior and robustness to bending and crumpling. The degradation behavior of the final system shows unaltered biodegradability level according to ISO 14851. These results represent a promising step toward sustainable flexible and large-area electronics, combining energy and materials efficient processes with largely available biodegradable substrates.

Keywords