Effects of Silica Fume and Micro Silica on the Properties of Mortars Containing Waste PVC Plastic Fibers

Abstract

Investigations on the usability of waste plastics as a new generation of construction materials have become one of the main concerns of researchers and engineers in recent decades. Waste plastics can be used either as aggregate replacement or as fiber reinforcement to enhance the properties of cementitious mixtures. This study focuses on the properties of waste PVC fiber-reinforced mortars containing silica fume and micro silica. Plastic fibers were added to the mortar mixes by volume fractions of 0%, 1%, 2%, and 3%. Cement was replaced by micro silica and silica fume by 5%, 10%, and 15% by weight of cement, respectively. In total, 28 different groups of mortars were produced. The results showed an enhanced ductility and deformation behavior of mortars upon the addition of waste PVC plastic fibers. It can be seen that fibers restricted crack propagation and maintained integrity, hence improving the ductility of the mortars. On the other hand, the addition of fibers led to a reduction in the physical and mechanical properties of the mortar samples. The compressive strength of the mortar samples decreased gradually by increasing the fiber content. Cement replacement by silica fume improved mechanical and microstructural properties of the mortars. The results also demonstrated that silica fume significantly decreased the porosity and water absorption capacity of mortar samples.

Keywords

• waste PVC plastic fiber
• physical properties
• mechanical properties
• silica fume
• micro silica