Soot Oxidation in Diesel Exhaust on Silver Catalyst Supported by Alumina, Titanium and Zirconium

Abstract

Diesel Particulate Filter (DPF) is used to limit the emission of particulate matter (PM). The operation of DPF has two consecutive functions which are filtration of PM and regeneration. Performance of DPF is reduced by clogging of the filter. This problem is improved by soot oxidation in the regeneration process. The soot is completely oxidized by oxygen when temperature is higher than 600 °C. However, the exhaust gas temperature in normal operating of the diesel engine is lower than the temperature of soot complete oxidation. The problem of low temperature in soot oxidation is improved by oxidation catalyst because the oxidation catalyst is used to reduce light of temperature in soot oxidation. The study’s purpose is to compare the oxidation activity of silver catalyst supported on alumina (Al2O3), Titanium oxide (TiO2), and Zirconium oxide (ZrO2). The compression of soot oxidation on silver catalyst loaded on several support which showed silver base on alumina was the best of soot oxidation compared with titanium oxide and zirconium oxide. The behaviour of soot oxidation in silver base on titanium oxide and zirconium oxide were similar activity.

Keywords

• soot oxidation
• silver catalyst
• tio2
• zro2