Buildings (Mar 2023)
Exploring the Cooling Potential of Ventilated Mask Walls in Neo-Vernacular Architecture: A Case Study of André Ravéreau’s Dwellings in M’zab Valley, Algeria
Abstract
This study investigates the thermal performance of the ventilated mask wall used in the low-income neo-vernacular dwellings designed by André Ravéreau to cope with the warm desert climate conditions of M’zab Valley, Ghardaia, in southern Algeria. This device is a ventilated façade provided with an opaque external massive cladding. It is designed to be particularly efficient in hot climates, functioning simultaneously as a brise-soleil and a ventilated façade, compared with conventional façade systems. Based on a typical experiment conducted during the summertime (12–14 August), a residential unit in Sidi Abbaz selected as a case study was modeled and calibrated using EnergyPlus (v8.4) software, and then a dynamic simulation was performed in order to assess the efficiency of the ventilated mask wall as a cooling strategy. By means of the validated thermal model, various alternatives for the façade materials were investigated, and the thermal behavior of the current ventilated mask wall was compared with a 45 cm thick limestone façade wall, and a 30 cm thick hollow clay brick wall under the same conditions. Countless benefits were achieved by the application of the mask wall system, including a stable and less fluctuant inner surface temperature, and a reduction in the incoming summer heat flux. The improvements performed, in particular the time lag of 12 h and the related decrement factor of 0.28 indicate the effectiveness of this wall system, which enabled radiant temperature drops of more than 10 °C, and an air temperature decrease of about 6 °C, during the summer sunniest hours. The results demonstrate that this solution is suitable for buildings design applications to meet the objective of low-energy demand in warm desert climates.
Keywords
