Study on the mechanical properties and deformation mechanism of copper with different volume fractions of gradient structure

Abstract

In this study, ultrasonic rolling process (USRP) were performed on the rolled copper samples (with an initial grain size of 11.4 μm) to obtain the gradient structure (GS), which comprises nanocrystalline layer (NL), deformed layer (DL), and center layer (CL). The different GS layer (NL and DL) volume fractions of samples were obtained by performing different passes of USRP after rolling, and the effect of the GS layer volume fractions on the mechanical properties was further studied. The morphology and structure of (unrolled, rolled and rolled + USRP) samples were characterized by electron backscattering diffraction (EBSD) and transmission electron microscope (TEM). In-situ tensile testing was used to investigate the tensile deformation behavior of the GS sample. The results show that the rolled + USRP (12 passes) sample with the thickest GS layer (volume fraction of 42%) has the greatest strength (yield strength (YS) 262 MPa and ultimate tensile strength (UTS) 325 MPa). The fine grains, dislocations and textures jointly strengthen the GS sample by increasing the force required for dislocation slip, and their contribution to YS is 51.3%, 44.4% and 4.3%, respectively. In addition, the nanocrystalline grains of GS layer make microcracks evenly distributed and hard to gather, to efficiently hinder cracks propagation and result in good ductility of GS samples. This study provides an effective method to obtain GS materials with good comprehensive properties and a deeper understanding of their deformation behavior and strengthening mechanism.

Keywords

• Gradient structure
• Strengthening mechanism
• In-situ tensile