Drawing Tower In-Line Fabrication and the Spectrum Analysis of Sampled Fiber Grating

Abstract

Abstract Sampled fiber grating is a special superstructure fiber Bragg grating with a wide range of applications in many fields. In this work, based on drawing tower in-line fabrication system, a new preparation method of the sampled fiber grating is proposed and experimentally demonstrated. Experimental result shows that the obtained sampled fiber gratings possess dense reflection spectra, with a minimum reflection peak interval of only 0.09nm. This method exhibits promising application prospect in the fabrication of the high-quality sampled fiber grating. On the other hand, the spectral characteristics of the sampled fiber grating are analyzed when the sub-grating is affected by the external physical quantities such as, in this paper, strain. Wavelength shift and intensity change in the reflection peak of the spectra indicate that the grating is affected differently by micro strains, due to the different spatial positions along the axis of the sampled fiber grating. This work is aimed at exploring the potential applications of the sampled fiber grating in quasi-distributed micro-area sensing with the millimeter level.

Keywords

• Sampled fiber grating
• drawing tower in-line fabrication
• spectrum analysis
• grating array
• sensing application