Simulation study of electromagnetic protection of ignition chip

Abstract

The purpose of this paper is to study the adaptability and enhancement methods of ignition chips in complex electromagnetic environments. In this paper, combined with simulation and calculation technology, we first establish the electromagnetic–electrical–thermal coupling simulation model of ignition chips and analyze the influence of two electromagnetic environments, continuous electromagnetic wave and nuclear electromagnetic pulse, on the electrical–thermal coupling in the bridge area of the ignition chip. The results show that a continuous electromagnetic wave field strength of 1200 V/m, irradiated for 5 s, a nuclear electromagnetic pulse with a rise time of 5 ns, a half-height width of 24 ns, and a leg wire length of 350 mm will cause the ignition chip to fire accidently. In order to suppress its accidental firing, the electromagnetic protection is enhanced by using parallel Transient Voltage Suppressor (TVS) diodes. It has been shown that parallel TVS diodes provide good protection against both continuous electromagnetic waves and nuclear electromagnetic pulses. In particular, the peak induced current decreases by more than 64.7% during the action of continuous electromagnetic waves, and the maximum temperature in the bridge area decreases by 54.34% during the action of nuclear electromagnetic pulses.