Internal Cavitating Flow Distribution and Performance Comparison of a Disc Pump with Radial Straight Blade

Abstract

Disc pumps with radial straight blade are unconventional designs that have been developed for hard-to-pump mixtures for many industrial applications. They are frequently used in chemical industries, sub-sea petroleum pumping systems with multi-phase media and so on. Due to the radial straight blade arrangement, they may suffer from cavitation onsets when being used under different pressure conditions. To study the influence of cavitation characteristic inside the present disc pump flow passages, experimental data analysis on a radial blade disc pump for a wide flow rate range (0 to 110 m3/h) is obtained. In addition, the Reynolds averaged (RANS) approach using the RNG k-ε turbulence model, is carried out under different working conditions with and without cavitation modelling. Two different pump meshing models are also implemented: the first one without hub and shroud side channels between the discs and the volute casing, the second one with both side channels corresponding to the complete real case geometry. The comparisons between experimental and numerical results reveal first that the complete geometry meshing must be used to recover the experimental performance curve especially at low flow rates whatever the rotational speed. Secondly, the cavitation effect is found to take place in precise locations (straight blade and connection column) inside the impeller at high rotational speed and high flow rates. Their effects correspond to the unexpected performance curve deterioration found for the highest rotational speed and high flow rates. Moreover, with the decrease of the inlet absolute pressure, the cavitation degree becomes serious, and the coupling phenomenon of straight blade cavitation and connection column cavitation is formed, which enlarges the scope and enhances the degree of cavitation. The present study proposes a data reduction procedure when open loop experimental testing procedure is used for specific disc pump design and the importance of the impeller-side channels interactions on head pump decrease at low flow coefficients.

Keywords

• disc pump
• radial straight blade
• cavitation
• flow characteristic