Lithium–sulfur batteries (LSBs) with high energy density have the potential to replace current commercial lithium-ion batteries. However, the shuttle effect and the low conversion kinetics of lithium polysulfide (LiPS) remain the main challenges in the development of LSBs. In this study, a metal-free and simple-to-prepare carbon nitride with a high surface area and tubular morphology (CN-nt) is used as the sulfur host for LSBs. Due to its unique nanostructure and rich active sites, it not only effectively disperses the active sulfur material and anchors soluble polysulfide species, but it also promotes the nucleation process of Li2S, thus achieving fast and sustainable Li-S redox reactions. Experimental results show that the obtained S@CN-nt electrodes exhibit a high sulfur utilization of 1296.2 mAh g−1 at 0.1 C and a significant rate capability of 689.4 mAh g−1 at the high current rate of 3C. More importantly, the capacity retention reaches 87.7% after 500 cycles. This simple strategy of engineering unique carbon-based nanostructured hosts can inspire new ideas for developing cost-effective and metal-free host materials for sulfur-based batteries.
