High-performance electrocatalyst for PEMFC cathode: Combination of ultra-small platinum nanoparticles and N-doped carbon support

Abstract

To accelerate the implementation of zero-emission power installations based on proton-exchange membrane fuel cells, it is necessary to maximize the power characteristics of these devices. For this purpose, we have obtained and tested a new N-doped carbon support and a synthesized Pt/C catalyst based on it with a platinum loading of about 37.3 %. A comparison of the degradation resistance of the initial support and the N-doped one has shown greater stability of the latter. At the same time, Raman spectroscopy has confirmed the presence of the C–N bond, which indicates the successful doping of carbon with nitrogen. The resulting Pt/C catalyst based on an N-doped support is characterized by a substantially narrow size dispersion and an ultra-small nanoparticle size of about 2.6 nm. The high-angle annular dark-field scanning transmission electron microscopy images of the synthesized catalyst have confirmed the presence of individual platinum atoms/clusters uniformly distributed over the surface of the support, and their presence is due to nitrogen embedded into the carbon structure. This material is characterized by a 50 m2 gPt-1 larger electrochemically active surface area and a 227 A gPt-1 greater mass activity compared to the commercial JM40 analog (40 % platinum loading). Meanwhile, the electrochemical parameters remaining after the accelerated stress testing are almost 2 times higher than those of JM40. And the power characteristics in the membrane electrode assembly for the catalyst synthesized by the facile one-pot synthesis method are 13 % (575 mW cm-2) higher than those of the commercial analog (500 mW cm-2). The Pt/C catalyst obtained during the research is deemed promising for commercial use in proton-exchange membrane fuel cells.

Keywords

• Oxygen reduction reaction
• N-doped carbon
• Durability performance
• Atom Pt
• Carbon materials
• Fuel cell