Pro Ligno (Dec 2015)
RECYCLING RECOVERED WOOD-BASED MATERIALS. FLATNESS, MOR AND MOE OF PANELS MADE FROM RECOVERED WOODEN BASED MATERIALS
Abstract
The objective of the research was to study the mechanical properties of recovered solid wood and wood-based materials, to create new panels made of strips of recovered oak and spruce wood, particleboards and blockboards and to study their mechanical properties, feasibility and use. Flatness, MOR and MOE were determined for the solid wood and wood-based materials recovered from construction and demolition sites. Four types of experimental panels (PL1, PL2, PALL1 and PALL2) were manufactured from solid wood strips alternating with either particleboard or blockboard strips glued edge to edge. Some of their physical and mechanical properties were investigated. All new panels made from recovered materials fell within allowable limits specified in European standard requirements for panel flatness. Panels type PL2, PALL1 and PALL2 show better values for MoR and MoE parallel to the grain when compared to the respective values for the recovered wood-based materials of which they are made, but panels type PL1 show no change. Panels type PALL2 are preferable to panels type PALL1 due to better mechanical properties. Panels type PL1 and PL2 show no such differences in their structure. The results also show that these new panels can be used successfully in furniture production, provided panels type PL1, PL2 ad PALL1 do not bear loads perpendicular to the grain or receive reinforcing elements.
