Data in Brief (Aug 2017)

Experimental data on compressive strength and durability of sulfur concrete modified by styrene and bitumen

  • M. Dehestani,
  • E. Teimortashlu,
  • M. Molaei,
  • M. Ghomian,
  • S. Firoozi,
  • S. Aghili

Journal volume & issue
Vol. 13
pp. 137 – 144

Abstract

Read online

In this data article experimental data on the compressive strength, and the durability of styrene and bitumen modified sulfur concrete against acidic water and ignition are presented. The percent of the sulfur cement and the gradation of the aggregates used are according to the ACI 548.2R-93 and ASTM 3515 respectively. For the styrene modified sulfur concrete different percentages of styrene are used. Also for the bitumen modified sulfur concrete, different percentages of bitumen and the emulsifying agent (triton X-100) are utilized. From each batch three 10×10×10 cm cubic samples were casted. One of the samples was used for the compressive strength on the second day of casting, and one on the twenty-eighth day. Then the two samples were put under the high pressure flame of the burning liquid gas for thirty seconds and their ignition resistances were observed. The third sample was put into the acidic water and after twenty eight days immersion in water was dried in the ambient temperature. After drying its compressive strength has been evaluated. Keywords: Sulfur concrete, Styrene, Bitumen, Ignition, Acid resistance, Compressive strength