Toward Practical Digital Phase Alignment for Coherent Beam Combining in Multi-Aperture Free Space Coherent Optical Receivers

Chenjie Rao; Sheng Cui; Yicong Tu; Keji Zhou; Deming Liu

doi:10.1109/ACCESS.2020.3035748

IEEE Access (Jan 2020)

Toward Practical Digital Phase Alignment for Coherent Beam Combining in Multi-Aperture Free Space Coherent Optical Receivers

Chenjie Rao,
Sheng Cui,
Yicong Tu,
Keji Zhou,
Deming Liu

Affiliations

Chenjie Rao: ORCiD; Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, China
Sheng Cui: ORCiD; Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, China
Yicong Tu: Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, China
Keji Zhou: ORCiD; Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, China
Deming Liu: Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, China

DOI: https://doi.org/10.1109/ACCESS.2020.3035748
Journal volume & issue: Vol. 8
pp. 202585 – 202595

Abstract

Read online

In free space optical communication systems, multi-aperture coherent optical receivers based on digital coherent beam combining (D-CBC) technique can provide exceptionally high sensitivity and are more robust to the atmosphere turbulence compared with the single aperture receivers with the same collection area. D-CBC relies on the digital phase alignment algorithm (PAA) to align the different versions of signals in phase. However, due to the limited working frequency and space of the digital signal processing (DSP) circuits, the main obstacle to realizing real-time phase alignment of multiple high-speed optical signals is the computation complexity. Therefore, we need to minimize the computation complexity while guaranteeing a satisfactory performance. In this paper, we investigate the relationship between the computation complexity and the combining loss (CL) for both maximum ratio combining (MRC) and equal gain combining (EGC) based D-CBC. Universal analytical expressions are deduced that allow easy minimization of the computation complexity for both MRC and EGC based receivers according to the prescribed CL and input optical signal-to-noise ratios (OSNRs). The analytical expressions are validated by extensive numerical simulations. It is demonstrated that the computation complexity is mainly determined by the quality of the signal with a larger OSNR in MRC, while it is determined by the overall quality of the signals in EGC. When EGC is replaced with MRC, the computation complexity can be reduced by more than 55% at the same CL when the OSNR difference between the signals to be combined is above 10dB. The maximum computation complexity increases exponentially with decreasing input OSNR lower limit and the smaller the CL, the steeper the slope. Furthermore, when the prescribed CL is relaxed from 0.1 to 0.5dB, the maximum computation complexity can be reduced by about 80%. The results provide useful guidelines toward practical phase alignment on a real-time platform.

Published in IEEE Access

ISSN: 2169-3536 (Online)
Publisher: IEEE
Country of publisher: United States
LCC subjects: Technology: Electrical engineering. Electronics. Nuclear engineering
Website: https://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=6287639

About the journal

Abstract

Keywords