Effect of using deflector in the distributor head of a pneumatic seed drill on the oat seed sowing unevenness

Abstract

Abstract This paper presents an innovative solution for a distributor head equipped with a deflector (controlled plate)—intended to change the tilt angle (realignment) of the pneumatic seed drill distributor head cover. We compared two qualitative parameters of seed sowing, coefficient of variation and coefficient of lateral unevenness of seed sowing (δ). Values were obtained on the test stand with an innovative deflector built into the distributor head at three angles of inclination (0°, 5° and 10°). Statistical analyses revealed a significant effect of airflow velocity and deflector angle, which corrects the deviation from the vertical plane of the distributor head, on the uniformity of seed sowing. In addition, regression equations were determined to predict the quality of the seed sowing process. The developed and manufactured innovative distributor head with a deflector that tilts in two planes, designed to improve the distribution evenness of the air stream transporting seed to individual coulters in pneumatic seed drills, received a positive review. The use of a deflector with automatic control of its position angle, correcting the deviation of the distributor head from a vertical plane in pneumatic seed drills improves the uniformity of seeding. Therefore, it is reasonable to use this solution for new pneumatic seed drills and those in use on soils with different relief (undulating surface). Moreover, the solution fits in with modern agricultural manufacturing in accordance with the ideas of precision agriculture.