JPFT (Jurnal Pendidikan Fisika dan Teknologi) (Jun 2024)
Comparing the Performance of Optical Communication Links using G.652 and G.655 Fiber in Python Packages
Abstract
This study investigates and compares the performance of a 10 Gbps optical communication link utilizing two prevalent single-mode fibers: G.652 and G.655. The analysis employs both theoretical calculations and Python-based simulations to assess the effectiveness of each fiber type in this high-speed transmission scenario. With the ever-growing demand for bandwidth in communication networks, 10 Gbps transmission systems are becoming increasingly commonplace. Single-mode fibers like G.652 and G.655 play a vital role in these systems, offering low signal attenuation for long-distance data transmission. However, each fiber type exhibits distinct dispersion characteristics, which can impact signal integrity over extended distances. This investigation adopts a two method for performance evaluation. Firstly, link power budget calculations are performed to determine the optical signal power before and after propagating through a 50-kilometer fiber span. The received power serves as the foundation for subsequent Q-factor and Bit Error Rate (BER) analysis. These calculations establish the theoretical limitations of the system based on well-defined formulas. Secondly, Python-based simulations are conducted to corroborate the theoretical findings and provide a more comprehensive performance assessment. This approach leverages the capabilities of two prominent Python packages: Opticomlib and OpticommPy. Opticomlib excels at analyzing the behavior of individual optical pulses within the system, enabling an understanding of the signal propagation. On the other hand, OpticommPy specializes in parameter sweep analysis, allowing for the investigation of how critical parameters like received power influence the Q-factor. By combining these functionalities, the simulations provide a detailed picture of the system's performance under various conditions. The calculated BER and Q-factor values for both G.652 and G.655 fiber links surpass the industry-accepted performance standards. These results demonstrate the effectiveness of using Python-based tools for comprehensive performance analysis of optical communication systems. However, it's important to note that slight discrepancies exist between the calculated and simulated results.
Keywords
