Reinforced Effect on Brick Wall Using Timber Wall as a Retrofitting Method

Abstract

The purpose of this study is to utilize timber material to enhance the in-plane shear strength and deformation capacity of a brick wall. The proposed strengthening method is light-weight and easy to assemble and includes a timber frame, plywood panel, M12 threaded rod with chemical epoxy, and the hold-down anchor. To evaluate the effectiveness of the reinforced brick wall, three walls were tested under a cyclic horizontal load and static compression stress: the brick wall (BW wall), the reinforced brick wall with timber (BW-T wall), and the reinforced brick wall with timber and the hold-down anchor (BW-TA wall). The proposed prediction method of the Kamiya and Inayama Murakami models assessed the BW-TA wall. The rocking was caused by the failure of BW and BW-T walls. However, because the BW-T wall failed in the lowest part of the wall, the timber part retained the original shape of the brick wall. When the diagonal on the BW-TA wall failed, the horizontal load at maximum load increased by 22%, and the drift angle calculated from the diagonal measurement increased 4.6 times.

Keywords

• brick masonry wall
• timber retrofit
• cyclic horizontal test