Effect of Voltage on Electrode Wear Rate (EWR) in the Electrical Discharge Machining (EDM) for Stainless Steel AISI 444

Abstract

Electrical Discharge Machining process (EDM) is a nontraditional metal removal technique that uses thermal energy to erode the workpiece without generating any physical forces of cutting between the tool and the machining part. It is used to cutting of hard and electrical conductivity materials and product intricate shapes of products. The aim of this work is to study the effect of changing voltage values on electrode wear rate (EWR). The machining parameters includes voltage (V), peak current (Ip), pulse duration (Ton) and finally, pulse interval (Toff). The results show that the EWR was increase with rising in voltage, peak current and pulse duration values but when the pulse interval value rises, the electrode wear rate reduce. The best (EWR) value was (0.093507) mm3/min that obtained at voltage (140) V, Ip (12) A, Ton (400) µs and Toff (12) µs.

Keywords

• electrical discharge machining (edm)
• ewr
• voltage values
• full factorial