Reliability Analysis of Rainwater Harvesting Tanks for Irrigation Use in Greenhouse Agriculture

Abstract

Rainwater harvesting is an ancient water management practice that has been used to cover potable and non-potable water needs. In recent years, this practice is adopted as a promising alternative and sustainable source of water to meet irrigation needs in agriculture in arid and semi-arid regions. In the present study, a daily water balance model was applied to investigate the size of rainwater tanks for irrigation use in greenhouse begonia and tomato cultivation in two regions of Greece with significant greenhouse areas. For the application of the water balance model, daily rainfall depth values of a 12-year time series (2008–2020) from representative rainfall stations of the study areas were used, as well as the daily water needs of the crops. The greenhouse roof was assumed to be the water collection area of the rainwater harvesting system with values ranging from 1000 to 10,000 m2. The analysis of the results showed that in the case of the begonia crop, the covered tanks ranged from 100 to 200 m3 per 1000 m2 greenhouse area with a reliability coefficient that ranged from 65 to 72%, respectively, to meet the water needs of plants. Further increase of the reliability coefficient was carried out with disproportionately large volumes of tanks. In the case of the tomato crop, covered tank volumes ranged from 100 to 290 m3 per 1000 m2 of greenhouse area, and had a reliability coefficient of 90% to 100%, respectively, while uncovered tanks had a maximum reliability coefficient of 91% for a critical tank volume of 177 m3 per 1000 m2 of greenhouse area and decreased for any further increase of tank volume.

Keywords

• rainwater tank sizing
• irrigation
• daily water balance model
• tomato
• begonia
• reliability