A Robust Translational Motion Compensation Method for Moving Target ISAR Imaging Based on Phase Difference-Lv’s Distribution and Auto-Cross-Correlation Algorithm

Abstract

Translational motion compensation constitutes a pivotal and essential procedure in inverse synthetic aperture radar (ISAR) imaging. Many researchers have previously proposed their methods to address this requirement. However, conventional methods may struggle to produce satisfactory results when dealing with non-stationary moving targets or operating under conditions of low signal-to-noise ratios (SNR). Aiming at this challenge, this article proposes a parametric non-search method that contains two main stages. The radar echoes can be modeled as polynomial phase signals (PPS). In the initial stage, the energy of the received two-dimensional signal is coherently integrated into a peak point by leveraging phase difference (PD) and Lv’s distribution (LVD), from which the high-order polynomial coefficients can be obtained accurately. The estimation of the first-order coefficients is conducted during the second stage. The auto-cross-correlation function for range profiles is introduced to enhance the accuracy and robustness of estimation. Subsequently, a novel mathematical model for velocity estimation is proposed, and its least squares solution is derived. Through this model, a sub-resolution solution can be obtained without requiring interpolation. By employing all the estimated polynomial coefficients, the non-stationary motion of the target can be fully compensated, yielding the acquisition of a finely focused image. Finally, the experimental findings validate the superiority and robustness of the proposed method in comparison to state-of-the-art approaches.

Keywords

• inverse synthetic aperture radar (ISAR) imaging
• translational motion compensation
• Lv’s distribution (LVD)
• auto-cross-correlation algorithm (ACCA)
• polynomial phase signals (PPS)