A Quantitative and Optimization Model for Microstructure Uniformity of Sinter Based on Multiple Regression-NSGA2

Abstract

The degree of homogeneity of the sintered ore phase structure directly determines its quality index. A sinter ore quality evaluation method based on the quantification of the homogeneity of the mineral phase structure is proposed. First, the magnetite particle size characteristics in the ore phase structures with different degrees of homogeneity were summarized under a polarized light microscope, and a criterion for evaluating the uniformity of the sintered ore phase structure based on the magnetite content of different particle size grades was determined. Second, a multiple regression model was established for the raw material composition ratio of magnetite with varying particle size grades. Finally, the multiple regression model was optimized using the second-generation non-dominated sorting genetic algorithm (NSGA2). The results show that mineral phase structure analysis categorized the magnetite particle sizes into 60 μm. The adjusted R2 of the multiple regression model of the chemical composition of raw materials and the proportion of magnetite of each particle size grade were all greater than 0.95, and the p values were all 2O3 mass% = 1.82, MgO mass% = 1.50, and R(CaO mass%/SiO2 mass%) = 1.84 for the highest degree of uniformity of the sintered ores. Under this sintering condition, the micro-mineral phase structure became more homogeneous, confirming the model’s reliability.

Keywords

• sinter
• multiple regression
• NSGA2
• magnetite particle size
• structural uniformity