Numerical study on the influence of riblet yaw-angle on drag reduction rate with different immersion heights

Abstract

This paper uses the Large-eddy simulation method to investigate the influence of riblet yaw angle on drag reduction rate with different immersion heights, revealing that the vortex structure is gradually transformed from riblet-tip vortex pairs to boundary vortex forms with the increase of yaw angle, and analyzing the influence mechanism of immersion height on the critical yaw angle. The result shows that the drag-reduction rate of riblets decreases as the yaw angle increases, and the critical angle of the riblet varies with the different immersion heights. When the immersion height is 0.7, 0.5, and 0.3, the critical yaw angle is close to 30, 40, and 50°, respectively. As the immersion height increases, the cross-flow velocity at the riblet tip is more accessible to reach the critical velocity at which a boundary vortex can be formed, resulting in a smaller critical yaw angle for larger immersion heights. Furthermore, with the yaw angle increases, the normal diffusivity of normal vorticity and spanwise vorticity increase and decrease, respectively, which indicates that the lateral flow fluctuations decrease beyond a critical yaw angle, while the Reynolds stress component due to energy dissipation induced by the streamwise velocity decreases. Meanwhile, with the formation of a boundary vortex, the ability of the riblet to reduce viscous shear stresses increases due to the reduction of near-wall velocity gradient, and the emergence of a high-pressure region on the windward side of the riblet and a low-pressure region on the leeward side, consequently augmenting the differential pressure drag. This work provides valuable insights for designing riblets with heightened effectiveness at larger yaw angles, thereby extending their applicability under diverse flow conditions.

Keywords

• Riblet
• Drag reduction
• Immersion height
• Yaw angle
• Vortex structure