Comparison of Fiber-Based Gas Pressure Sensors Using Hollow-Core Photonic Crystal Fibers

Abstract

A systematic comparison of fiber-based gas pressure sensors using different types of hollow-core photonic crystal fibers (PCFs) is conducted. The sensor was fabricated by splicing a segment of hollow-core silica capillary between a single mode fiber (SMF) and a hollow-core PCF. A Fabry-Perot (FP) cavity configuration is thus formed with the capillary tube as the sensing cavity, while the PCF acts as gas passage to the external environment. External pressure change would lead to the variation in the refractive index of air in the sensing cavity, resulting in a wavelength shift of the interference dips. The pressure sensitivity is measured to be around 4 nm/MPa, with a high linearity of 99.7% or above, regardless of the type of the PCFs we used as gas inlet. Among the four different PCFs, the large-mode-area (LMA) PCF shows the highest fringe contrast in the reflection spectrum. Modal analysis reveals that this is due to the high reflectivity caused by the solid core of LMA-PCF. Our experimental results also indicate that the length of the sensing cavity, as well as the offset fusion splice will influence the fringe contrast. The sensor has potential application in gas pressure sensing for advantages of high sensitivity, compact size and ease of fabrication.

Keywords

• Gas pressure sensor
• hollow-core photonic crystal fiber