Water Supply (Aug 2021)

Parameters optimization for eutrophic lake water treatment by a novel process of iron-carbon micro-electrolysis coupled with catalytic ozonation using response surface methodology

  • Shanqing Jiang,
  • Yu Cao,
  • Pei Han,
  • Yanan Zhang,
  • Hankun Zhang,
  • Qiuya Zhang,
  • Xia Xu,
  • Yuanyuan Zhou,
  • Liping Wang

DOI
https://doi.org/10.2166/ws.2021.074
Journal volume & issue
Vol. 21, no. 5
pp. 2414 – 2424

Abstract

Read online

A novel process of iron-carbon micro-electrolysis (ICME) coupled with catalytic ozonation (CO) for treatment of eutrophic lake water was developed. A series of batch experiments with ICME alone and CO alone was designed to investigate the effects of process parameters, such as initial pH, dose of Fe-C, time of micro-electrolysis, ozone flux, dose of TiO2/activated carbon (TiO2/AC), and time of ozonation, on the removal rates of total nitrogen (TN), total phosphorus (TP), CODMn and Chl-a. The process parameters were optimized using response surface methodology. The results showed that initial pH, dose of Fe-C and ozone flux had significant effects on removal of TN, TP, CODMn and Chl-a. Within the range of selected operating conditions, the optimized values of initial pH, dose of Fe-C, time of micro-electrolysis, ozone flux, dose of TiO2/AC, and time of ozonation were 3.8, 13.7 g/L, 29.6 min, 3.19 L/min, 294.74 mg/L and 106.73 min, respectively. Furthermore, ICME alone had significant advantages in TP and CODMn removal and CO alone favored TN and Chl-a. Under the optimal process conditions, the final removal rates of TN, TP, CODMn, and Chl-a by the hybrid ICME-CO process reached 75.33%, 86.29%, 94.42% and 97.57%, respectively. The present research provides a new alternative technology with promise for treatment of eutrophic lake water. HIGHLIGHTS A novel coupling ICME-CO process was developed for treatment of eutrophic water.; Six process parameters were optimized using RSM.; Initial pH, dose of Fe-C and ozone flux had significant effects on removal of various pollutants.; The final removal rates for TN, TP, CODMn, and Chl-a by the ICME-CO process reached 75.33%, 86.29%, 94.42% and 97.57%.;

Keywords