Theoretical models for gas adsorption‐induced coal deformation under coal seam field conditions

Abstract

Abstract Coal deformation caused by gas adsorption is a well‐known phenomenon and has played an important role in many engineering fields. For example, the bulk coal deformation induced by gas is a primary factor in coal and gas outbursts, and the changes in coalbed permeability are primarily determined by the evolution of the coal fracture volumetric strain during gas recovery. However, the current models of coal deformation induced by gas do not fully consider the coal seam field conditions or the deformation factors. To better fit coal seam field conditions and provide a basis for engineering applications, in this work, based on coal's physical structure, coal seam field conditions, the energy balance approach, poroelasticity, mathematical differentiation, and previous scholars' research results, the volumetric strain models of bulk coal, coal fracture, and coal matrix under coal seam field conditions are established. In addition, based on the analysis of the effect of gas pressure on coal deformation, the difference in gas pressure effects on the bulk coal deformation between experimental conditions and coal seam field conditions revealed that when the bulk coal deformation is tested in a laboratory, the gas pressure exerts a compressive effect on the bulk coal. However, under coal seam field conditions, the gas pressure has a swelling effect on the bulk coal. Additionally, gas pressure exerts an compression on the coal matrix and a swelling on the coal fracture under coal seam field conditions. At the end of the paper, the established models were analyzed and discussed from multiple perspectives. It was shown that the coal deformation models established in this paper are all accurate and reliable.

Keywords

• coal deformation
• coal seam field conditions
• gas adsorption
• gas pressure