Potential Use of PLA-Based Films Loaded with Antioxidant Agents from Spent Coffee Grounds for Preservation of Refrigerated Foods

Abstract

The aim of this work concerned the production of an active food packaging suitable for refrigerated foods. Polylactic-acid-based films were produced by optimizing the solvent casting technique and testing different loadings of extracts obtained from spent coffee grounds. Indeed, an extract obtained by high-pressure and -temperature extraction (HPTE) and a further purified extract by liquid–liquid extraction (LLE) were separately used as active agents, and the effects on packaging features and active compounds migration were analyzed. The selected active agents showed antioxidant and lipid peroxidation inhibition effects on food simulants (peroxide values of 9.2 ÷ 12.0 meqO2/kg extra virgin olive oil), demonstrating the possibility of enhancing food shelf life. In addition, significant effects on the packaging structure due to the presence of the extract were observed, since it can enhance gas barrier properties of the polymer (O2 permeability of 1.6 ÷ 1.3 × 10−9 cm2/s) and confer better processability. In general, the HPTE extract exhibited better performances than the further purified extract, which was due to the presence of a complex pool of antioxidants and the browning effect on the film but a limited loading capacity on the polymer (840 μg caffeine/g PLA), while higher loading capabilities were enabled using LLE extract.

Keywords

• active food packaging
• spent coffee grounds
• waste valorization
• high-pressure and -temperature extraction
• polylactic acid
• gas barrier properties