F1000Research (Sep 2023)
Implementation of distributed arithmetic-based symmetrical 2-D block finite impulse response filter architectures [version 1; peer review: 2 approved]
Abstract
Background: This paper presents an efficient two-dimensional (2-D) finite impulse response (FIR) filter using block processing for two different symmetries. Architectures for a general filter (without symmetry) and two symmetrical filters (diagonal and quadrantal symmetry) are implemented. The proposed architectures need fewer multipliers because of the symmetry of the filter coefficients. Methods: A distributed arithmetic (DA)- based multiplication method is used in the proposed architecture. A dual-port memory-based lookup table (DP-MLUT) is used in the multiplication instead of lookup-table (LUT) to reduce the area and power of the FIR filter. The filter's throughput is increased by using block processing. Memory reuse and memory sharing methods are introduced, which reduces the need for many registers and hence the circuit complexity. The architectures are written in Verilog Hardware Description Language and synthesized using Genus Synthesis tool-19.1 in 45nm technology with a generic library of Cadence vendor constraints. The synthesis tool generates the area, delay, and power reports. Power consumption of architectures is calculated with an image size of 64 X 64 and at 20 MHz frequency. Results: Compared to existing architectures, the synthesis results show improvements in power, area, area delay product (ADP), and power delay product (PDP). The proposed MLUT-based 2-D block Quadrantal Symmetry Filter (QSF) for length 8 with block size 4 consumes 58.94% less power, occupies 59.5% less area, 48.44% less ADP and 47.78% less PDP compared to best existing methods. Conclusions: A novel DA-based 2-D block FIR filter architecture with various symmetries is realized. Symmetry is incorporated into the filter coefficients to minimize the number of multipliers. The LUT size is optimized by odd multiples or even multiples storage techniques. Also, the overall area of the architecture is decreased by DP-LUT-based multipliers. The proposed filter architecture is area-power-efficient. It is best suited for applications that have fixed coefficients.
