Ciência Rural (May 2023)

Development of an intervertebral disc prosthesis prototype for the canine cervical spine

  • Paulo Vinícius Tertuliano Marinho,
  • Ana Paula Macedo,
  • Thiago André Salvitti de Sá Rocha,
  • Cláudio Pereira de Sampaio,
  • Carolina Camargo Zani Marinho,
  • Antônio Carlos Shimano,
  • Mônica Vicky Bahr Arias

DOI
https://doi.org/10.1590/0103-8478cr20220027
Journal volume & issue
Vol. 53, no. 12

Abstract

Read online

ABSTRACT: Cervical arthroplasty with disc prosthesis has been proposed as a treatment option for dogs with Cervical Spondylomyelopathy. The present study developed a novel vertebral disc prosthesis for dogs. Sixteen Functional Spinal Units (C5-C6) were collected from dog cadavers with body weights ranging between 25 and 35 kg, and their vertebral measurements were used to design a prosthetic disc. The sizing of the prosthesis was performed based on the averages of the measurements of width, height, and length of the vertebral bodies from C5-C6 of all specimens. The prosthesis was developed using the Rhinoceros 3D® and SolidWorks® programs, and 3D prototyping was carried out to define the best design. The developed prosthesis consisted of two independent parts that are fixed to the cranial and caudal vertebral bodies, in the intervertebral space, and fitted together by metal-to-metal surfaces capable of moving in the lateral, ventral, and dorsal directions. Each part of the prosthesis is angled in two portions: vertically, in the intervertebral space, and horizontally, in contact with the ventral surface of the vertebral bodies, both of which are fixed by means of monocortical locking screws. The design of the developed prototype allowed a good fit in the intervertebral space between C4-C5, C5-C6, and C6-C7.

Keywords