Bipolar Switching Properties of GdO_x:SiO₂ Thin Film Resistive Random Access Memory Using Co-Sputtering Technology

Abstract

Using two kinds of targets (gallium and silicon dioxide) and the rf magnetron sputtering deposited technique, GdOx:SiO2 thin film RRAM devices were deposited on TiN/Si substrate to form a metal–insulator–metal (MIM) structure. In addition, different oxygen concentrations and rf sputtering power parameters were prepared for the GdOx:SiO2 thin films. Decrease of the defects and oxygen vacancies of the GdOx:SiO2 thin films were used and repaired by rapid thermal annealing technology. Indium tin oxide (ITO) as the top electrode on the GdOx:SiO2 thin film was prepared by the physical vapor deposition (PVD) method, and ITO/GdOx:SiO2/TiN/Si structures of the GdOx:SiO2 thin films’ RRAM devices were also made. In addition, the current–voltage curves and devices’ endurance properties were measured by an impedance analyzer. Finally, the crystalline style, the preferred phase, the grain size, and surface microstructure of the thin films were analyzed and observed from X-ray diffraction and field emission scanning electron microscope measurements.

Keywords

• RRAM
• GdO_x:SiO₂
• bipolar resistive switching
• physical properties
• rf power