Study on Aerodynamic Drag Reduction at Tail of 400 km/h EMU with Air Suction-Blowing Combination

Abstract

In order to further reduce the aerodynamic drag of High-speed Electric Multiple Units (EMU), an active flow control drag reduction method combining air suction and blowing is proposed at the rear of the EMU train. A numerical calculation method based on realizable k-ε is used to investigate the aerodynamic drag characteristics of a three-car EMU with a speed of 400 km/h. The influence of different suction-blowing mass flow rates, the position and number of suction and blowing ports on the aerodynamic drag and surface pressure of the EMU tail are analyzed. The results demonstrate that suction and blowing at the tail reduce the pressure drag of EMU. And with the growth of air suction-blowing mass flow rate, the aerodynamic drag reduction rate of the tail car gradually increases, but the increment of drag reduction rate gradually decreases. Under the same mass flow rate of the suction and blowing, the closer the ports are to the upper and lower edges of the windscreen, the lower the pressure drag of the tail car is. At the same flow flux of air suction and blowing, the more the number of ports, the better the pressure drag reduction effect of the tail car. This study provides a reference for the next generation of EMU aerodynamic drag reduction and is of great significance for breaking through the limitations of traditional aerodynamic drag reduction.

Keywords

• EMU
• air suction-blowing combination
• drag reduction
• aerodynamic drag
• pressure drag