Study of Factors Affecting the Copper Ore Leaching Process

Abstract

This paper provides an overview of hydrometallurgical copper extraction studies in which liquid extraction technology has been used with four copper deposits of different compositions. The sulfuric acid consumption rate and copper extraction efficiency, which are dependent on the initial content and forms of calcium compounds and other impurities in ore samples, were calculated, and the results are presented herein. It was established that during the leaching process, silicate compounds of alkaline earth metals, in addition to calcium and magnesium carbonate compounds, would affect the levels of sulfuric acid consumption, thereby actively lowering the acidity of the environment. Moreover, these compounds could partially sorb copper ions from sulfuric acid leaching solutions. Thus, the analysis of waste ore samples showed that residual copper is mainly contained in the form of complex silicate complexes. The presence of divalent iron compounds in the composition from one of the deposits also allowed us to perform a biochemical leaching experiment with preliminary oxidation using an Acidithiobacillus ferrooxidans bacterial culture adapted to the ore composition. The use of this biochemical method in the copper leaching process resulted in a significant reduction in sulfuric acid consumption, by 40%, and a copper recovery rate of 87.2%.

Keywords

• copper leaching
• sulfuric acid consumption
• acid-intensive minerals
• bio-oxidation