Synthesis of nano calcium silicates from waste calcite and aragonite phases for efficient adsorptive removal of industrial organic pollutants

Abstract

The present study focuses on the adsorption efficacy of solid-state synthesized calcium silicate for removing congo red dye. Three different sources were used as calcium precursors; one was calcium carbonate, and the other two were natural waste sources, aragonite (P. globosa) and calcite (Eggshells). Structural analysis and functional groups of the samples were carried out by X-ray diffractometer (XRD), and a Fourier Transform Infrared Spectrometer (FTIR). Various well-known models/equations models such as the Liner Straight Line method of Scherrer’s equation (LSLMSE), Sahadat-Scherrer Model (SSM), Monshi-Scherrer model (MSM), Williamson-Hall model (WHM), Size-Strain plot method (SSP), and Halder-Wagner Model (HWM) were applied to compute the crystallite size of the synthesized calcium silicates; the estimated crystallite size range was 8–77 nm. The adsorption efficacy of the synthesized E-CaSiO3, S-CaSiO3, and C-CaSiO3 was assessed under various provisos for eradicating Congo red dye from wastewater. Computed results revealed that the dye removal percentages were approximately 100 % at 120 min and 200 rpm for 0.2 g E-CaSiO3. The point of zero charge evaluation showed that the pH of the adsorbents during maximum dye removal was 7 and was less than the value of pHpzc. Thermodynamics studies confirmed that the adsorption process was spontaneous. The method of adsorption of dye by the adsorbent was more clearly comprehended by Langmuir, Freundlich, and Temkin adsorption isotherm. 151.28 mg/g was the maximum adsorption capacity for S- CaSiO3 depending on the Langmuir isotherm model’s linear form (R2 = 0.924).

Keywords

• Aragonite
• Calcite
• Adsorption
• Congo red
• X-ray diffraction