Experimental Study on Mechanical Properties of Recycled Aggregate Mixed Soil

Abstract

In the context of efforts aimed at reducing carbon emissions, the utilization of recycled aggregate soil mixes for soil stabilization has garnered considerable interest. This study examines the mechanical properties of mixed soil samples, varying by dosage of a soft soil curing agent C, recycled aggregate R content, and curing duration. Mechanical evaluations were conducted using unconfined compressive strength tests (UCS), field emission scanning electron microscopy (FESEM), and laser diffraction particle size meter tests (PSD). The results indicate that the strength of the mixed soil samples first increases and then decreases with higher dosages of recycled aggregate, reaching optimal strength at a 20% dosage. Similarly, an increase in curing agent dosage enhances the strength, peaking at 20%. The maximum strength of the mixed soils is achieved at 28 days under various proportions. The introduction of the curing agent leads to the formation of a flocculent structure, as observed in FESEM, which contributes to the enhanced strength of the soil mixes. Specimens prepared with a combination of 20% R and 20% C, maintained at a constant moisture content of 20%, and cured for 28 days exhibit a balance between economic, environmental, and engineering performance.

Keywords

• recycled aggregates
• soft soil stabilizers
• soil mixes
• UCS
• FESEM
• PSD