Texture development of pure Ti by rolling at various temperatures and its effect on sheet formability

Abstract

This work investigated the effect of rolling temperature (25–800 °C) on rolling-texture development and sheet formability of pure Ti. The rolling temperature significantly affected the development of the typical transverse-direction (TD)-split basal texture in pure Ti sheet by altering the tilting angle of (0001) basal poles. Notably, a normal-direction (ND) basal texture, where the tilting angle of (0001) basal poles was approximately 0°, developed at an intermediate rolling temperature of 400 °C. This result is remarkable because the ND basal texture is rare in pure Ti. Formation of this unusual ND basal texture was attributed to significant activation of basal slip. In contrast, a typical TD-split basal texture was dominant at the other rolling temperatures. Formation of this typical texture was attributed to pyramidal slip. After subsequent recrystallization annealing, sheet formability was examined. Despite their different textures, the sheets previously rolled at the different rolling temperatures showed similar formability. This similarity occurred because any given texture could not simultaneously provide in-plane stretching uniformity and thinning capability during sheet forming. The present study suggests an important guidance for modifying texture of pure Ti sheets to effectively increase their formability.

Keywords

• Titanium
• Rolling
• Texture
• Sheet formability
• Deformation anisotropy