A novel bi-planar calibration method for digital templating in total hip arthroplasty

Abstract

Abstract In total hip arthroplasty and reconstructive orthopedic surgery, pre-operative digital templating is essential for surgical treatment optimization, risk management, and quality control. Calibration is performed before templating to address magnification effects. Conventional methods including fixed calibration factors, individual marker-based calibration and dual-scale marker methods are not reliable. A novel bi-planar calibration method is described aiming to reduce the error below clinical significance. The bi-planar calibration method requires two conventional orthogonal radiographs and a standard radiopaque marker ball. An algorithm computes the hip plane height parallel to the detector in the antero-posterior radiograph. Foreseeable errors (i.e., patient rotation and misplaced markers or lateral offset) are considered in a correction algorithm. Potential effects of errors are quantified in a standard model. Influence of rotation in lateral radiographs and lateral offset of marker on the calibration factor are quantified. Without correction, patient rotation in the lateral radiograph of 30° results in absolute calibration error of 2.2% with 0 mm offset and 6.5% with 60 mm lateral offset. The error is below the threshold of 1.5% for rotation less than 26° with 0 mm offset and 10° with 60 mm offset. The method is supposed to be reliable in precisely predicting the hip plane and thereby the calibration factor. It may be superior to other methods available. In theory, the method allows correction of clinically relevant rotation of at least 30° and marker displacement without impacting the computed calibration factor.