Experimental investigation of dehumidification process regulated by the photothermoelectric system

Abstract

To decrease indoor relative humidity and have relaxing environments, small dehumidifiers are widely used in tropical climatic. Due to the benefits of eco-friendly, small size and silence operation, the thermoelectric dehumidifier has gained interest but has limited practical application due to poor efficiency. Therefore, this study investigates the dehumidification characteristics of the thermoelectric module powered by a photovoltaic system for the production of fresh water under real climatic conditions. The performance of a novel prototype named as the Photo-Thermoelectric Dehumidifier (PVTE-D) was investigated both numerically and experimentally in different combinations of airflow rate and input power. The results obtained from the experiment suggested that the water condensate collection was increased by increasing the input power from a PV panel to the TE-D. In the month of May, the maximum water condensate collection of 1,852.3 mL/hr was attained at the input supply of 6 A and 5 V to the PVTE-D system. In the majority of cases, when the airflow rate is below 0.013 kg/s, maximum collections of water condensate have been achieved. This study provides a detailed understanding of the optimally suitable structural parameters of the PVTE-D under different operating conditions and reveals a novel configuration for higher water condensation capacity. HIGHLIGHTS Photovoltaic powered thermoelectric dehumidification system.; Simulation and experimental study of PVTED system.; Optimum performance parameter evaluation by regulating input power and air flow rate.;

Keywords

• dehumidification
• photovoltaic
• simulation
• thermoelectric module
• validation