Materials Research Express (Jan 2024)
Enhanced hydrophilicity of low melting point polylactic acid by butenediol vinyl alcohol copolymer via melt blending
Abstract
In order to solve the poor hydrophilicity of low melting point polylactic acid (LMPLA) limiting its application in absorbent sanitary products. LMPLA/butenediol vinyl alcohol copolymer (BVOH) blends with different ratios were manufactured by simple melt blending. The BVOH exhibited good compatibility and dispersity in LMPLA matrix without chemical reaction, and LMPLA/BVOH blends showed sea-island structure. The introduction of BVOH could promote the crystallization of LMPLA and improve the crystallinity, whereas the crystallization of BVOH were limited. Furthermore, the introduction of BVOH could also decrease the thermal stability of LMPLA without affecting its application, but the tensile stress of LMPLA could be significantly increased. The tensile stress of LMPLA/BVOH blends could reach 78.59 MPa (increased by 10.9%) when he BVOH content was 3 wt%. Most importantly, the introduction of BVOH could significantly improve the hydrophilicity of LMPLA. The initial water contact angle decreased from 68.5° to 51.4° with the increase of BVOH content, and the contact angle decreased from 63.7° to 44.6° at 60 s. Moreover, the contact angle change rate of LMPLA/BVOH blends increased with the increase of BVOH content at different contact time, which also indicated adding BVOH could sharply improve the hydrophilicity of LMPLA.
Keywords