Наука и техника (Oct 2019)
Experimental Investigations on Determination of Polymer Packing Material Composition with Biocide Additives
Abstract
The paper shows that creation of materials with antibacterial and antifungal action presupposes an introduction of additives in them. One of the directions concerning fight against mold fungi is an inclusion of biocide additives having vegetable origin in structure of polymer materials used for manufacturing packing products. The main mission of anti-microbial additives is reduction of microbe amount in product mass and on its surface. Activity of anti-microbial compounds depends on the following parameters: concentration of active component, pH, temperature, polymer type, introduction method (with plasticizer or in melting state) and time period of their contact with polymer. In addition it is necessary to take into account such not unimportant factor as sensitivity of micro-organisms. Modern film polymer materials ensure only a certain level of product protection. They can not targetedly affect biochemical and microbiological changes in a packing product. It is necessary to develop new packing materials with selective permeability that create a barrier on the way of extremely intensive gas and moisture exchange, outside microflora flow, and prevent an evolution of undesired micro-organisms on packing products. Polymers have been selected as a basis for a bactericide packing material. Investigations have shown that composition including PEHP 98% (polyethylene of high pressure) + DGR (disproportionate gum rosin) + DETA (diethylenetriamine) has inhibited (hindered) sufficiently in a good way growth of mold fungi and PEHP composition with additives of tallow pitch and polyethylenepolyamine has demonstrated a rapid deterioration of strength characteristics and an increase in additive of the supposed mixture including pine oleoresin (POR) with DETA and DGR (with DETA more than 2%) hinders rapidly strength material characteristics.
Keywords
