The efficiency of the electro-osmosis method on the consolidation and strength properties of the gray clay of Tabriz

Abstract

Abstract Background Consolidation of clays could be a very time-consuming procedure. However, preloading can increase the speed of consolidation; applying an electric field can accelerate this procedure significantly. The efficiency of the electroosmosis approach has been studied for different types of clays previously. At the same time, there is no information about the performance of the EO method for Tabriz gray clay. Methods This paper investigates the effects of the EO technology on Tabriz gray clay using a modified oedometer consolidation apparatus. The achieved results of the EO consolidation of the Gray clay of Tabriz are compared with the standard Kaolin clay (KC-which produced industrially). Three different electrodes (Iron, Copper, and Aluminum) are employed to study about effects of the electrode type, and two different voltages (12 V and 24 V) are applied to assess the impact of the input electric field on the settlement of samples. Results It is shown that the copper electrode leads to maximum volumetric strains while the iron electrode results in minimum volumetric strains. In addition, it is shown that the larger input voltage leads to larger settlements. The results indicate that the EO approach is more efficient for the Gray clay of Tabriz in comparison to the KC, where gray clay shows larger settlements while subjected to an electric field. Unconfined compression tests are also applied to some samples, and the EO method’s influence on the samples’ strength is discussed. Conclusions The achieved results demonstrated that the EO method can be efficiently used to improve the consolidation and strength properties of the gray clay of Tabriz.

Keywords

• Electro-osmosis
• Consolidation
• Gray clay
• Kaolin
• Unconfined compression
• Electrode