Development of in-situ Zn–3Cu–10ZnO composite prepared by high-pressure solidification for orthopedic applications

Abstract

Biodegradable zinc (Zn)-based composites are considered to be the next generation of promising orthopedic implant materials due to their degradability and the multiple functionality of combining metal and ceramic phases. However, its clinical bone-implant application is seriously limited due to their poor interface binding ability and mechanical properties. Herein, we developed the biodegradable in-situ Zn–3Cu–10ZnO composite through powder metallurgy using Zn and copper (Cu) powder combined with hot forging, followed by the high-pressure solidification (HPS) process for bone-implant application. Microstructural characterization showed that the HPS process can densify composite, form a uniform distribution of fine ZnO particle, and increase Cu atom solid solubility in the Zn matrix. Mechanical test revealed that the HPS composite exhibited a high compression performance with a compressive yield strength of 340.8 MPa, an ultimate compressive strength of 514.2 MPa, and a failure strain of ≥70%. The HPS composite exhibited the lowest corrosion rate of 25.8 μm/y and 44.3 μm/y measured by electrochemical corrosion and immersion tests, respectively, among these composites. Moreover, the diluted extracts of HPS composite with a concentration of ent% showed a higher cytocompatibility among these composites and better antimicrobial capability than those of the as-cast pure Zn. Accordingly, the HPS Zn–3Cu–10ZnO composite is expected to be a potential biodegradable material for orthopedic applications.

Keywords

• Biodegradability
• Mechanical property
• In-situ synthesis
• High-pressure solidification
• Zn-based composites