Advances in Electrical and Electronic Engineering (Jan 2019)

Diffraction Properties and Application of 3D Polymer Woodpile Photonic Crystal Structure

  • Petra Urbancova,
  • Dusan Pudis,
  • Matej Goraus,
  • Lubos Suslik,
  • Beata Sciana,
  • Wojciech Dawidowski,
  • Jaroslav Kovac jr.,
  • Jaroslava Skriniarova

DOI
https://doi.org/10.15598/aeee.v17i3.3329
Journal volume & issue
Vol. 17, no. 3
pp. 367 – 373

Abstract

Read online

We present a new technique for modification of diffraction and optical properties of photonic devices by surface application of polymer Three-Dimensional (3D) woodpile Photonic Crystal (PhC) structure. Woodpile structure based on IP-Dip polymer was designed and fabricated by Direct Laser Writing (DLW) lithography method based on nonlinear Two-Photon Absorption (TPA). At first, we investigated diffraction properties of woodpile structure with a period of 2 μm. The structure was placed on a glass substrate, and diffraction patterns were measured using laser sources with different wavelengths. After diffraction properties investigation, the fabricated structures were used in optoelectronic devices by their surface application. Our polymer 3D PhC woodpile structures were used for radiation properties modification of light emitting devices - optical fiber and Light Emitting Diode (LED) and for angular photoresponse modification of InGaAsN-based photodiode. The modification of the far-field radiation patterns of optical fiber and LED and spatial modulation of light coupling into photodiode chip with applied structures were measured by goniophotometer. Quality of fabricated structures was analyzed by a Scanning Electron Microscope (SEM).

Keywords