Y-Type Zeolite Synthesized from an Illite Applied for Removal of Pb(II) and Cu(II) Ions from Aqueous Solution: Box-Behnken Design and Kinetics

Abstract

A Y-type zeolite was prepared from illite clay, which was activated and synthesized by a solid-phase alkali fusion technique with reduced reaction conditions and crystal methods. The optimal synthesis conditions were investigated using the Box-Behnken design for a NaOH/illite (mass ratio) of 1:2, an activation temperature of 185 °C, and an activation time of 2.7 h. The synthesized Y-type zeolites were characterized by various analytical techniques such as FT-IR, XRD, and SEM, and the results obtained show that small amounts of quartz and P-type zeolites are present in the synthesized products. The mixture was classified as a zeolitic mineral admixture (ZMA). The adsorption performance of ZMA on Pb(II) and Cu(II) in solution was evaluated by batch adsorption experiments. The results showed that ZMA had good adsorption performance for Pb(II) and Cu(II), with maximum adsorption amounts of 372.16 and 53.46 mg/g, respectively. From the investigation, it was concluded that the adsorption process is chemisorption occurring in monomolecular layers and relying on electrostatic adsorption, ion exchange and complexation of hydroxyl groups on the ZMA surface for heavy metal cations. The ZMA reusability result shows that sodium chloride has the ability to regenerate the active site by restoring the ion exchange capacity without significant loss of Pb(II) and Cu(II) adsorption.

Keywords

• zeolite-Y
• heavy metals
• bio-retention system
• illite
• kinetics