Green synthesis of nano-MgO using lemon juice for amplified photocatalytic degradation of organic pollutants
Md. Kawcher Alam,
Md. Sahadat Hossain,
Sumaya Tabassum,
Newaz Mohammed Bahadur,
Samina Ahmed
Affiliations
Md. Kawcher Alam
Glass Research Division, Institute of Glass & Ceramic Research and Testing, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka, 1205, Bangladesh; Department of Applied Chemistry and Chemical Engineering, Noakhali Science and Technology University, Noakhali, Bangladesh
Md. Sahadat Hossain
Glass Research Division, Institute of Glass & Ceramic Research and Testing, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka, 1205, Bangladesh
Sumaya Tabassum
Glass Research Division, Institute of Glass & Ceramic Research and Testing, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka, 1205, Bangladesh
Newaz Mohammed Bahadur
Department of Applied Chemistry and Chemical Engineering, Noakhali Science and Technology University, Noakhali, Bangladesh
Samina Ahmed
Glass Research Division, Institute of Glass & Ceramic Research and Testing, Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka, 1205, Bangladesh; Corresponding author.
This study examines the photocatalytic activity of the green synthesized (using lemon juice) MgO nanoparticles under a halogen light for the degradation of Congo Red (CR). The characterization of the prepared sample was studied by applying Fourier Transform Infrared (FTIR) Spectroscopy, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Thermogravimetric Analysis (TGA). By applying XRD analysis, the crystallographic variables of the MgO NPs were determined and the crystallite size was obtained from a variety of formulas/models (Scherrer equation, Williamson-Hall model, Monshi-Scherrer model, Size-Strain Plot, Halder-Wagner model, etc). The crystallite size was found in a valid range of 4.62–99.03 nm. Photocatalytic degradation of Congo Red (CR) has been made under halogen light by considering a dye concentration of 20 ppm at 40 mL solution for 0.05 g of the catalyst sample. Operating conditions were fixed as neutral pH, 25 °C temperature, and 40 min exposure time of the halogen lamp.