Interaction law between mining stress and fault activation and the effect of fault dip angle in longwall working face

Abstract

Abstract Study of the interaction between fault activation and mining stress evolution in the longwall working face is helpful to provide a targeted area for fault type heavy mine pressure disaster control. Combining theoretical analysis, physical and numerical simulation, the mechanical mechanism of fault activation is analyzed, the interaction law between mining stress and fault activation is studied, and the influence of fault dip angle on the evolution of fault activation and mining stress is discussed. The minimum critical dip angles α of normal and reverse fault activation are π/4 + φ/2 and π/4-φ/2, respectively. During the mining process, the activation position of the fault surface, the peak values of stress and displacement gradually increase and transfer from the high position of the fault to the low position, and the peak value of the advance abutment pressure reaches the maximum at the fault. The advancing distance of the working face required for fault activation gradually decreases with the decrease of the fault dip angle, and the peak elevation area of the working face gradually increases with the decrease of the fault dip angle. Combined with the on-site microseismic monitoring results, it can be seen that when the working face is about 20 m away from the fault, the stress and energy increase sharply, which is the main control area of the impact disaster.

Keywords

• Fault activation
• Mining stress
• Fault dip angle
• Similar simulation