Tool Wear Characteristics and Strengthening Method of the Disc Cutter for Nomex Honeycomb Composites Machining with Ultrasonic Assistance

Abstract

Nomex honeycomb composites are used extensively in aerospace, automotive, and other industries due to their superior material properties. However, the tool wear during their machining can compromise the processing accuracy and the stability of the whole machining process, thus studies on the tool wear and strengthening method are urgently needed. This study presents a radial difference calculation method (RDC) to evaluate the tool wear of the disc cutter quantitatively in both conventional cutting and ultrasonic assisted cutting. The morphology of the tool wear process and its characteristics were analyzed. Two different heat treatments (salt bath quenching and vacuum quenching) were carried out to strengthen the tool performance. The research results demonstrated that ultrasonic vibration could significantly reduce the tool wear of the disc cutter, by up to 36%, after the same machining time. Salt bath quenching and vacuum quenching can both strengthen the tool performance. Particularly, after vacuum quenching treatment, the disc cutter’s metallographic grains were refined, and the tool wear could be reduced by 64%, compared to the as-received disc cutter. The findings in this study could be instructive to obtain further understanding of the machining mechanism and to improve methods in ultrasonic assisted cutting of Nomex honeycomb composites.

Keywords

• Nomex honeycomb composites
• ultrasonic assisted cutting
• disc cutter
• tool wear
• tool strengthening