Behavior of strengthened Timber Concrete Composite under axial loads

Abstract

The research study focuses on different strengthening techniques for timber concrete composites (TCC) using different types of wire and wire mesh integrated with a layer of epoxy on a timber core embedded in concrete using experimental and analytical procedure. The impact of TCC on axial compression performance, modulus of elasticity, failure mode and post failure behavior and ductility were compared to reference concrete specimens. Different types of wire and wire mesh used in strengthening of the timber core, timber core size and reinforcement in the concrete cylinder were all parameters considered in this study. Timing of application of the epoxy on the wire strengthened timber core was very important. For structural applications, where the weight reduction and ductility as well as post failure endurance are essential, the development of this composite is recommended. The ratio of the ductility index to the weight is discussed. The light weight of the timber composite, and the increased ductility were noted in this study. An equation to estimate the axial compression capacity of the strengthened timber concrete composite was developed in this study. This study will pave the way for further applications for timber concrete composite aiming at reducing dead weight of concrete and the reducing the amount of concrete and steel in construction.

Keywords

• Timber core
• Concrete
• Steel reinforcement
• Wire mesh
• Composites
• Axial loading