Hydrology (Jul 2022)

Provision of Desalinated Irrigation Water by the Desalination of Groundwater Abstracted from a Saline Aquifer

  • David D. J. Antia

DOI
https://doi.org/10.3390/hydrology9070128
Journal volume & issue
Vol. 9, no. 7
p. 128

Abstract

Read online

Globally, about 54 million ha of cropland are irrigated with saline water. Globally, the soils associated with about 1 billion ha are affected by salinization. A small decrease in irrigation water salinity (and soil salinity) can result in a disproportionally large increase in crop yield. This study uses a zero-valent iron desalination reactor to effect surface processing of ground water, obtained from an aquifer, to partially desalinate the water. The product water can be used for irrigation, or it can be reinjected into a saline aquifer, to dilute the aquifer water salinity (as part of an aquifer water quality management program), or it can be injected as low-salinity water into an aquifer to provide a recharge barrier to protect against seawater intrusion. The saline water used in this study is processed in a batch flow, bubble column, static bed, diffusion reactor train (0.24 m3), with a processing capacity of 1.7–1.9 m3 d−1 and a processing duration of 3 h. The reactor contained 0.4 kg Fe0. A total of 70 batches of saline water (average 6.9 g NaCl L−1; range: 2.66 to 30.5 g NaCl L−1) were processed sequentially using a single Fe0 charge, without loss of activity. The average desalination was 24.5%. The reactor used a catalytic pressure swing adsorption–desorption process. The trial results were analysed with respect to Na+ ion removal, Cl− ion removal, and the impact of adding trains. The reactor train was then repurposed, using n-Fe0 and emulsified m-Fe0, to establish the impact of reducing particle size on the amount of desalination, and the amount of n-Fe0 required to achieve a specific desalination level.

Keywords